Steel Scaffolding Walking Board for sale

1.Steel Scaffolding Walking Board for sale 2.Material:Q195-Q235 3.Surface treat:hot-dipped galvanised 4.Width:210,225,240

Product detail:

1.Steel Scaffolding Walking Board for sale

2.Material:Q195-Q235

3.Surface treat:hot-dipped galvanised

4.Width:210,225,240,250,420,480,500mm

5.Thickness: 1.0-2.0mm

6.Length: To be produced as per your requirement

7.Folding box should be more stronger

8.Patent holes design to be reduced products' weight

9.Patent ribs make products stronger and drain the water providing any rain days 

10.Life time:5 years guarantee

Dimension: 

Item	Wide (mm)	Height (mm)	Thickness (mm)	Length (m)	Folding Box	support bracket	Weight (kg)
KH-SW-210-001	210	45	1.1	1.0	Normal	flat support	3.33
KH-SW-210-002	210	45	1.1	1.5	Normal	flat support	4.87
KH-SW-210-003	210	45	1.1	2.0	Normal	flat support	6.4
KH-SW-210-004	210	45	1.1	2.5	Normal	flat support	7.93
KH-SW-210-005	210	45	1.1	3.0	Normal	flat support	9.46
KH-SW-210-006	210	45	1.1	4.0	Normal	flat support	12.53
KH-SW-210-007	210	45	1.1	1.0	Normal	rectangular support	3.41
KH-SW-210-008	210	45	1.1	1.5	Normal	rectangular support	5.03
KH-SW-210-009	210	45	1.1	2.0	Normal	rectangular support	6.64
KH-SW-210-010	210	45	1.1	2.5	Normal	rectangular support	8.25
KH-SW-210-011	210	45	1.1	3.0	Normal	rectangular support	9.86
KH-SW-210-012	210	45	1.1	4.0	Normal	rectangular support	13.09
KH-SW-210-013	210	45	1.1	1.0	Normal	trapezoid support	3.38
KH-SW-210-014	210	45	1.1	1.5	Normal	trapezoid support	4.97
KH-SW-210-015	210	45	1.1	2.0	Normal	trapezoid support	6.55
KH-SW-210-016	210	45	1.1	2.5	Normal	trapezoid support	8.13
KH-SW-210-017	210	45	1.1	3.0	Normal	trapezoid support	9.71
KH-SW-210-018	210	45	1.1	4.0	Normal	trapezoid support	12.88

How to extend scaffolding walking Board

1.Have a 'competent person' assess and document the needs of the area for extended

scaffolding. A 'competent person' in some states is required to have special licensing,

and in others experience with scaffolding set up is enough. What is important is that

you keep some form of documentation that the person designated as 'competent'

approves each step of the scaffolding assembly

2.Assemble the frame of your scaffolding system. Whether it is mobile or stationary,

make sure that the supports for your scaffolding plans follow the assembly plans

3.Lay your first plank across the supports of your platform. Have your competent

person check that each plan extends a minimum of 6 inches and a maximum of

12 inches past any support bracket.

4.Extend your scaffolding plank by laying the next plank over it. If the span

of your support is 7 feet, your plans must overlap a minimum of 6 inches up

to a maximum of 12 inches. If the span of your plank support is 10 feet, the boards

must overlap 12 inches.

5.You may provide cleats to additionally connect your extended scaffold planks again.

Ask your competent person to designate that the cleats are provided and used only

to prevent the scaffold planks from sliding and not as a means of providing any

re-enforcement to the boards at all.

Steel Scaffolding Walking Board for sale